Product Type: 32000 Series Proximity Probe Housing Assembly, compatible with the 3300 XL proximity probe, primarily designed for radially mounted sensors (vibration or Keyphasor measurements). It provides mechanical protection and mounting support, facilitating probe maintenance and gap adjustment without the need to dismantle the machine.
Probe Adapter Specifications: The "28" in the model number indicates compatibility with the 3300 XL 8mm probe, featuring multiple certifications to meet installation and signal transmission requirements for this probe specification.
Probe cable length adaptation: The "05" in the model number indicates compatibility with a 0.5-meter probe cable, ensuring proper fit with the housing assembly.
Bracket Adapter Specifications: The "04" in the model number may indicate a bracket adapter length of 4 inches (approximately 101.6 mm), used to adjust the probe mounting position and clearance to meet the installation size requirements of different equipment (based on the inferred rule that adapter specifications in the same product series are set in inch increments).
Probe penetration depth: The "130" in the model number indicates a probe penetration depth of 130 millimeters, meaning the effective length of the probe extending into the housing is 130 millimeters, suitable for scenarios requiring specific installation depth specifications.
Accessory Configuration: In the model number, "00" indicates no additional accessories, including only the basic two plugs and two washers, without extra components such as NPT adapters, reducers, or cable glands.
Installation thread specification: The "02" in the model number indicates that the installation thread is 3/4-14 NPT (National Pipe Thread), which requires the use of a mounting adapter to ensure the housing assembly is securely installed on the equipment surface